Lip Gloss Kit Instructions

Each Lip Gloss tube holds about 10 ml of product. If you fill the Melter Cup about 3/4 of the way, and add your colors, you will make about 10ml of product.

Preparation

  1. Cut the bulb off one pipette and place it over the tip of the syringe.
  2. Wrap the lip gloss tube container with plastic wrap to avoid finger smudges (optional)
  3. Prepare your work surface with paper and have paper towels at the ready.

Prepare your color

  1. Squeeze about 8-9 ml of Versagel into the melter bowl (about 3/4 full)
  2. Heat the Versagel in the micro about 20 seconds. Be careful, as the bowl will get hot.
  3. Add drops of color and scoops of powder. In general, 2-6 drops of color and 2-6 scoops of powder, depending on how intense you want the product to be.
  4. Stir together with the spatula, reheat for 20-30 seconds.
  5. Add 2-4 drops of flavor oil.
  6. Stir with spatula
  7. Spatula the product into your prepared syringe.
  8. Place the syringe tip (with the pipette) all the way to the bottom of the container.
  9. Squeeze slowly to fill.
  10. Put the wiper back into place. See video.
  11. Put the top on the tube.

Cleanup (Versagel is most easily cleaned by wiping down first with paper towel)

  1. To clean the melter bowl between colors, simply wipe it clean with a paper towel.
  2. To clean the syringe between colors, put some uncolored Versgel in the syringe and push it through.

 

Back to the top