This broad-spectrum preservative is a paraben-free and formaldehyde-free product which preserves against a variety of nasties.
Here is the short and sweet:
+ Highly effective broad spectrum antimicrobial
+ Effective at pH levels below 6.0
+ Non-formaldehyde donor
+ Very Mild. Our vendor advises thatthis product has been tested by a major cosmetic manufacturer for use in their mascaras and itfound to be the least irritating of all the preservatives they tested.
+ Compatible with most raw materials, including water and oil phase products
In Lotions, Creams and Similar:
Cap 5 is particularly recommended for lotions, creams and similar. It disperses in both water and oil phase ingredients and so is appropriate for all kinds of lotions, creams, shampoos at a recommended use level of 0.5 - 1.5% by weight.
In a Pressed Powder:
We recommend you add the preservative to the liquid binder you are using (such as jojoba oil, fractionated coconut oil, a silicone blend, our MyMix Liquid Binder) at a use level of 0.1% - 0.2% by weight. You do not need as much preservative in a pressed powder simply because there is no water phase in a pressed powder. Also, as this preservative is based on the alcohol Phenoxyethanol, there is a chance of irritation if used in pressed eye shadows.
In a Loose Powder:
In theory you could add the preservative at a use level of 0.1% - 0.2% by weight so long as you are using a LOTof grinding, but in home use the concern would be not enough mixing which results in preservative "hot spots". It is better if you mix the preservative with a little jojoba oil or similar and then add this product to your loose powder. In this way you reduce the chance of hot spots. Note that adding an oil or similar wetting agent to a loose powder is often a good idea anyway, as it keeps the dusting down. Finally, as this preservative is based on the alcohol Phenoxyethanol, there is a chance of irritation if used in eye shadows.
In Lip Products:
Normally on lip products, and depends on the water level in your formula (if there is any), 0.8-1.0% should be sufficient in preserving your product.
In all cases, shake well before adding.
The INCIfor the product is: Phenoxyethanol, Caprylyl Glycol, Potassium Sorbate, Hexylene Glycol. The Caprylyl and Hexylene Glycols are the liquid carriers. They are there simply to disperse the active ingredients. The active ingredients in the product are: Phenoxyethanol (35-45%). This ingredient is a bactericide preservative. Potassium Sorbate (8 - 15%) This ingredient is an anti-fungal and anti-microbial agent that converts into sorbic acid at low pH. With all these ingredients above combined, TKB's Preservative Cap-5 helps to prevent bacterial growth in your finished productsand givesthem alonger shelf life.
Pencil sharpener. FAQs Ingredients: Plastic.
Non-bleeding, stable liquid pigment in glycerin, recommended for Melt and Pour soap making; may be...
$ 2.30 $ 1.15
High End Silver Square Lip Gloss Tubes with LED lights. Each tube measures 4.25 inches tip-to-tip...
I picked these colors simply because I love pink! These colors not only bring me...
How much do I use for press eye shadow glitter? Do you have a video on how to use it I'm a first time buyer I never done any diy makeup thx
Here is our kit for making a pressed powder:
It may be a good start for you. We are currently (3/17) working on a kit for pressed glitters. We hope to launch something by the end of April.
Can this preservative be affective in an anhydrous product such as a emulsified sugar scrub? And what temperature should the preservative to added?
I'm making lipgloss using Versagel should I use cap 2 or cap 5? How many drops for a 5 gram container. Also I want to press highlighters and glitters should I use cap 5 and how many drops for a 57mm pan? Thabk you
Cap-2 is probably a better choice. You will want to use about 1 drop, maybe two. For the pressed powders and glitters it depends on the solvent. Cap-2 is better in an oil, Cap-5 in a water base. About 2-3 drops per 15ml of product.
I am excited about using the preservative for the Versagel. How much should we use per 2#?
About 1.5% by weight in a 2 pound batch would mean about .48 of an ounce, or half an ounce.
Is the preservative Cap 5 the same as Optiohen or Optiphen Plus?
It is not the same product.
Cap-5 is Phenoxyethanol, Caprylyl Glycol, Potassium Sorbate, Hexylene Glycol.
Optiphen Plus, as example is Phenoxyethanol, Caprylyl Glycol, Sorbic Acid.
Optiphen is Phenoxyethanol (and) Caprylyl Glycol Phenoxyethanol (and) Caprylyl Glycol (and) Sorbic Acid - See more at: http://www.bulkapothecary.com/product/raw-ingredients/preservatives/optiphen-plus-paraben-and-formaldehyde-free/?gclid=CLrYxZKj49MCFYplfgodLhoGcw#sthash.tKm8PWDB.dpuf Phenoxyethanol (and) Caprylyl Glycol (and) Sorbic Acid - See more at: http://www.bulkapothecary.com/product/raw-ingredients/preservatives/optiphen-plus-paraben-and-formaldehyde-free/?gclid=CLrYxZKj49MCFYplfgodLhoGcw#sthash.tKm8PWDB.dpuf
Hi I'm wanting to make my own mixing medium for loose pigment. It consists of 3 parts glycerine and 1 part water. Which preservative is best suited and how much should I use for the recipe stated above?
You should use our Cap-5 and you would use 0.5 - 1.5% by weight. Please be sure to use distilled water.